Ptp

Parameters for PTP time synchronization.

When all participating cameras are synchronized via PTP, the Trigger command can trigger the cameras at the same time in software trigger mode.

Cameras can serve as a PTP master when they can reach each other over the network (e.g. when they are connected to the same network switch). Alternatively you can set up your own PTP master and make it reachable from all cameras.

JSON Format

Type

Object

Permissions

Read-only

Properties

Property	Description
ClockId	Device PTP clock identifier.
Enabled	Whether PTP synchronization is active.
GrandmasterClockId	Grandmaster clock identifier, is the top most device in the PTP synchronization chain.
(MeanPropagationDelay)	The mean path delay between a pair of ports as measured by the delay request-response mechanism.
OffsetFromMaster	The offset in ms between slave and a master clock.
ParentClockId	Parent clock identifier in case the device is a slave.
Status	Current state of the PTP clock.