Discovery¶
Parameters for controlling the discovery of devices.
By default devices are discovered via broadcasts in the network. See the firewall configuration guide for more information.
If your network setup does not allow this and you already know the IP addresses of your devices you can discover them via unicast instead.
Note
Unicast discovery is not supported for uEye-based and X-series devices.
Device discovery is running continuously in the background. Changes to this node will thus not immediately affect the list of discovered cameras. Use the UpdateDeviceList command to explicitly wait for a discovery cycle.
Initialization from an Environment Variable¶
The initial value of this node is taken from the ENSENSO_CONFIGURATION environment variable, which can overwrite the default behavior. You can change the values later by modifying them in the NxLib tree.
For example to make sure that broadcast discovery is disabled from the start launch your process with
ENSENSO_CONFIGURATION='{"Discovery":{"Broadcast":false}}'
To discover a specific device via unicast set
ENSENSO_CONFIGURATION='{"Discovery":{"Unicast":["10.0.0.42"]}}'
JSON Format¶
- Type
Object- Permissions
Read-only