Vibration / Shock¶
B-Series¶
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
C-Series¶
C57-*-S, C57-*-M
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 5g |
Shock |
IEC 60068-2-27 60g/1.9ms, 25g/6ms |
C57-*-L
Vibration (sinusoidal) |
IEC 60068-2-6 30-150Hz / 5g |
Shock |
IEC 60068-2-27 40g/1.9ms, 25g/6ms |
N3x-Series¶
All N3x-Series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
N4x-Series¶
All N4x-Series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
S-Series¶
All S-Series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
X-Series¶
Projection Unit
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
Note
On X-series models the calibration stability under vibration and shock depends on the type of camera and lenses used in the assembly. All tests have been conducted with Ricoh FL-CC1214A -2M lenses with locking varnish applied between lens and C-Mount flange. Other lenses might show inferior performance.
CP
Vibration (sinusoidal) |
IEC 60068-2-6 30-150Hz / 5g |
Shock |
IEC 60068-2-27 40g/1.9ms, 25g/6ms |
FA
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 5g |
Shock |
IEC 60068-2-27 60g/1.9ms, 25g/6ms |
Note
These specifications are valid for all X-Series model identifiers. Depending on the specific configuration and lens type X-series cameras with 200mm baseline (i.e. X3x-*/*/*-200/*) might fulfill higher sinusoidal and shock ratings which need to be verified in application specific tests.
XR-Series¶
Projection Unit
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
Note
On XR-series models the calibration stability under vibration and shock depends on the type of camera and lenses used in the assembly. All tests have been conducted with Ricoh FL-CC1214A -2M lenses with locking varnish applied between lens and C-Mount flange. Other lenses might show inferior performance.
FA
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 5g |
Shock |
IEC 60068-2-27 60g/1.9ms, 25g/6ms |
Note
These specifications are valid for all XR-Series model identifiers. Depending on the specific configuration and lens type X-series cameras with 200mm baseline (i.e. X3x-*/*/*-200/*) might fulfill higher sinusoidal and shock ratings which need to be verified in application specific tests.