(Apply)¶
How the computed calibration is applied to the raw calibrations of the camera.
The raw calibrations contain the full intrinsic calibration data as it is stored in the camera’s EEPROM. This parameter determines whether the calibration computed by this command replaces the existing raw calibrations or is appended to them as an additional entry.
Replace: The computed calibration replaces the existing raw calibrations. This is the default behavior.Add: The computed calibration is appended to the existing raw calibrations. This allows collecting calibrations acquired at different temperatures, between which the camera model will be interpolated, see the (Temperature) parameter.
Only applicable to the intrinsic calibration of a stereo camera.
JSON Format¶
- Type
String- Default Value
"Replace"
Values¶
Value |
Description |
|---|---|
|
Replaces the existing raw calibrations with the computed calibration. |
|
Appends the computed calibration to the existing raw calibrations. Requires the (Temperature) parameter to be set and all existing raw calibrations to already have a temperature assigned. |