GetRawCalibrationData

Converts a camera’s current calibration to the camera’s current EEPROM format and returns it as a hex-encoded string.

The returned string can be saved and later passed as Calibration parameter to LoadCalibration to restore the calibration on the very same camera while also keeping the EEPROM format revision.

Note

This command returns the camera’s current calibration. To obtain the calibration currently stored in the camera’s EEPROM, execute LoadCalibration before this command.

Note

Before this command can be used, the camera must have a calibration loaded. This can happen with the LoadCalibration parameter of the Open command (which is true by default) or with the LoadCalibration command.