(ProjectorWaitingTime)

The time the camera had to wait for the projector.

When the camera’s projector reaches its maximum duty cycle it has to wait until it can capture the next frame. This can happen if the exposure time is high and a lot of frames are captured in quick succession (e.g. when using FlexView).

Note

To reduce the waiting time:

  • Reduce the exposure time if the image quality stays acceptable. You might be able to compensate the shorter exposure time with more gain.

  • If you have an X-series camera which you assembled yourself, please check that the apertures of sensor and projector lenses are set up correctly.

JSON Format

Type

Number

Unit

ms

Permissions

Read-only

Minimum

0